The machine is mainly used for roughing, finishing straight rack,
the maximum processing length of 2000 mm, the maximum processing
modulo 8 mm, the highest precision level is 6, the tooth surface
roughness up to Ra3.
The machine disc shaper cutters, once the device shaper cutters
shaft helical guide and a helix angle of the tool can be processed
The machine can process non-ferrous metals, cast iron, carbon steel
and alloy steel material rack, especially for single piece and
small batch production, can also be used for mass production.
1. The machine before and after bed subvertical layout conducive to
the modification of the machine,the overall rigidity.
2. The machine FANUCOI-CCNC system,with three CNC rotary
axis:shaper cutters,longitudinal movement of the lateral movement
of the table and the table.
3. The machine usesthebestcurvedoublerollercamknifeinstitutionscan
achieve accurate, stable, low-noninvolvement.
4. The main movement of the machine tool hydraulic friction-type
shifting nonmechanistic power speed of the main motor.
5. Machine radial and tangential fee-dare import ed precision ball
screw,to ensure high-precision cutting.
6. Machining rack program of one-way and two-way two cutting cycle
to meet various types of processing requirements.
7. The knife shaft reciprocating motion of the upper and lower
supporting strong lubrication,bench timing and constant
8. The machine uses a large amount of oil cooling,cutting heat away
in time, accuracy and stability.
9. The machine is equipped with the red cutting system can be
controlled manually or automatically.
10.The machine has an independent hydraulic station,to prevent the
contaminated oil return timely and effective.
11. In order to meet the needs of users,we can also provide the
design and manufacture of jigs and fixtures.
12.The machine has a separate sealed electrical control cabinet and
air conditioned, and cantilever rotational operation panel,which
will help the operation.
13.The machine is equipped with a beautiful,safe and suitable
protective cover to prevent oil splashing visibility conditions,and
is equipped with automatic exhaust cut.
|Maximum machining length||mm||2000|
|maximum processing module||mm||8|
|largest processing tooth width||mm||100|
|maximum stroke length||mm||120|
|tool spindle number of strokes||beats / min||80 ~ 550|
|the knife shaft tool support surface distance from the table tops||mm||55 ~ 185|
|shaper cutters circumference of the feed rate (C-axis)||mm / stroke||0.04 ~ 0. 8|
|X shaft diameter to the amount of feed||mm / stroke||0.02 ~ 1|
|Y axis cut to the amount of feed||mm / stroke||0.02 ~ 1|
|X-axis fast-moving||m / min||1. 2|
|fast-moving Y-axis (table)||m / min||2|
|shaper cutters spindle of cut||mm||≥ 0.5|
|main motor power||kw||15|
|Machine Dimension (L × W × H)||mm||5000 × 2650 × 2450|
|heavy total machine tool||tons||approximately 15|